RockSolid Scales
3D Skully™ - Wild and White *Bargain Bin*
3D Skully™ - Wild and White *Bargain Bin*
NOTE: In the bargain bin due to a void along the edge of the scale. This gives you 4-1/4" of scale that is entirely useable, or the void can be easily worked around. Highlighted in the 4th picture.
Sanded to 150 grit, sprayed with clear coat to bring out the color and figure.
Tips for Working with Resin:
- Use sharp, preferably new drill bits or end mills
- Set drill press or mill to high RPM (2500-3000 rpm)
- Use slow, gentle feeds to prevent grabbing and twisting the material
- Be sure to release pressure on the drillbit occasionally to help clear the chips from the tip of the drillbit.
Dimensions: 5-3/4"x1-7/8"x1/4"
Resin scales may contain small bubbles (micro bubbles), I make every effort to minimize and prevent them, however it is impossible to eliminate them entirely. If you encounter some microbubbles, fill them with thin CA.
Some of the 3D Resin Scales will have small voids along the edges, this is due to a lack of resin flowing into these small areas. I do everything in my power to prevent this, but due to the complexity of some of the designs I cannot eliminate this from occurring. I will make every effort to note this in the description and pictures.