#3001 - Resin Scales

Sanded to 150 grit, sprayed with clear coat to bring out the color and figure. 

Tips for Working with Resin: 
- Use sharp, preferably new drill bits or end mills 
- Set drill press or mill to high RPM (2500-3000 rpm) 
- Use slow, gentle feeds to prevent grabbing and twisting the material 
- Be sure to release pressure on the drillbit occasionally to help clear the chips from the tip of the drillbit. 

Dimensions: 5-15/16"x1-3/4"x5/16"

Resin scales may contain small bubbles (micro bubbles), I make every effort to minimize and prevent them, however it is impossible to eliminate them entirely. If you encounter some microbubbles, fill them with thin CA.