Blue and Translucent Red Skully™ Panel

Sanded to 150 grit, sprayed with clear coat to bring out the color and figure.

Tips for Working with Resin:
- Use sharp, preferably new drill bits or end mills
- Set drill press or mill to high RPM (2500-3000 rpm)
- Use slow, gentle feeds to prevent grabbing and twisting the material
- Be sure to release pressure on the drillbit occasionally to help clear the chips from the tip of the drillbit.

Dimensions: 5-3/4"x4-1/8"x5/16"

NOTE: These are not glow in the dark, the second photo is demonstrating the translucense.